Couplings
Rigid couplings
PHE R50MHTB
Rigid couplings
PHE R50MHTB
| Size | R50 |
| Bushing no. | 5040 |
| Max. bore (mm) | 125 |
| Max. bore (in) | 4.92 |
| D (mm) | 362 |
| D (in) | 14.25 |
| C (mm) | 92 |
| C (in) | 3.62 |
| E (mm) | 102 |
| E (in) | 4.02 |
| H (mm) | 266 |
| H (in) | 10.47 |
| G Nominal (mm) | 267 |
| G Nominal (in) | 10.51 |
| B Nominal (mm) | 314 |
| B Nominal (in) | 12.36 |
| S+ (mm) | 7 |
| S+ (in) | 0.28 |
| J* (mm) | 92 |
| J* (in) | 3.62 |
| L (mm) | 211 |
| L (in) | 8.31 |
| Weight (kg) | 135 |
| Weight (lbs) | 297.62 |
Please note:
A complete coupling consists of one male and one female flange.
J* is the wrench clearance to allow for tightening and loosening the bush on the shaft.
The use of a shortened wrench will permit this dimension to be reduced
S+ is the distance between shaft ends
Weight given are for couplings with midrange taper bushes.
A complete coupling consists of one male and one female flange.
J* is the wrench clearance to allow for tightening and loosening the bush on the shaft.
The use of a shortened wrench will permit this dimension to be reduced
S+ is the distance between shaft ends
Weight given are for couplings with midrange taper bushes.